Stretcher Trolley B3

Stretcher Trolley B3

I. Performance specifications:

1. Dimensions (L × W × H):

   - High position: 190 × 55 × 90 cm

   - Low position: 190 × 55 × 25 cm

2. Load capacity: 159 kg

3. Net weight: 38 kg

   Gross weight: 40 kg

II. Instructions for use:

1. The stretcher surface is made of a sponge-padded mattress, making patient transport comfortable. It can be pushed onto an ambulance and into a ward by a single medical staff member.

2. When the stretcher needs to be lowered, rotate the safety handle, then squeeze the handle, and the stretcher will lower automatically.

3. After the patient has been transported to the ward or destination, open the rear fixing seat and slowly pull the stretcher out of the ambulance; the stretcher legs will lower automatically.

4. The two ends and foot section of the stretcher are equipped with rotary elastic locking devices. Flip up the locking devices to lock them and ensure patient safety; flip them down to make it convenient for patients to get on and off.

5. If the head section of the stretcher needs to be raised or lowered, press the button under the stretcher and lift it upward or downward.

III. Scope of application:

Used for transporting the sick and wounded in ambulances, and can also be used for general surgery.

IV. Precautions:

1. When transporting patients, be sure to flip up and lock the side rail locking devices to ensure transport safety. Use safety belts when necessary.

2. When transporting the sick and wounded, the safety devices should be in the locked state.