K1 Luxury Lifting Transfer Trolley
Core Features
规格：3870x640x670/960mm产品构成本产品由A床部分、B床部分、C床部分构成,车体A床在手术室内,车体B床在手术室外,当调节它们到同一高度时,把B床推向A床,两车对接,然后C床可以沿着轨道从一张床移至另一张床。反之亦然。床面靠背部分可折起角度0~60°±5°产品配备床垫、盐水架。
Specifications: 3870 × 640 × 670/960 mm
Product composition: This product consists of Bed A, Bed B, and Bed C. Bed A is placed inside the operating room, and Bed B is placed outside the operating room. When they are adjusted to the same height, Bed B is pushed toward Bed A to dock the two beds. Then Bed C can be moved along the rails from one bed to the other, and vice versa.
The backrest section of the bed surface can be folded up at an angle of 0–60° ± 5°.
The product is equipped with a mattress and an IV pole.