Endoscopy Room Dedicated Pendant

Endoscopy Room Dedicated Pendant

1. Working power supply: AC 220 V, 50 Hz.

2. Double-arm movement range (radius): 835 mm and 835 mm (configurable according to hospital requirements); arm thickness >10 mm.

3. Horizontal rotation angle: 0–340°. The arms and the terminal box can rotate horizontally separately or simultaneously.

4. Net load capacity: ≥180 kg.

5. Instrument platforms: 3 layers (height adjustable), 560 mm × 550 mm, with one drawer and silicone gel corner protectors and anti-collision design.

6. Gas interface configuration: 2 oxygen, 2 vacuum, 2 medical air (configurable according to hospital requirements):

a. Different colors and shapes of connectors to prevent misconnection;

b. More than 20,000 insertion and withdrawal cycles;

c. Secondary sealing with three states (on, off, unplugged), and can be serviced while gas is supplied.

7. Power sockets: 8 pcs, 220 V, 10 A; network interface: 1 pc; grounding terminals: 2 pcs.

8. Stainless steel adjustable IV pole: 1 pc.

9. Power and gas source interfaces are located on both sides of the tower body, fully realizing electrical and gas separation to ensure safe equipment operation.

10. Surface treatment: electrostatic spraying.

11. Main body material: high-strength aluminum alloy profiles.

12. Ceiling-mounted installation, stable and firm.

13. Optional endoscopy-dedicated display mounting brackets and endoscopic instrument hangers.

14. The arm is additionally equipped with a rotating main arm made of a new type of alloy material in an octagonal profile. The rotating main arm provides unlimited 360° rotation. The balance system adopts imported arm spring components, featuring a lightweight structure, easy operation, and precise positioning, providing the maximum adjustment range. It can support 17–32 inch displays, and the required cables are built in for display installation. The position and angle of the display can be adjusted according to on-site conditions.